EDVADO HARDWARE
DOT BAS v6.1
Wireless tilt and operating hours sensor
Specification information
Specifications are based on the available manufacturer manuals. Features not described in those documents are not confirmed.
Not specified: absent from sources. Not confirmed: catalog claim without a technical document. Not supported: explicitly excluded by the manufacturer.
User manual
Technical specifications
Body and measurement
- Dimensions
- 95 × 58 × 35 mm; including mounting brackets
- Weight
- 110 g; including battery
- Enclosure protection
- IP67
- Operating temperature
- −40 to +80 °C; depends on the battery
- Tilt measurement range
- 0–180° relative to the Earth
- Accelerometer
- Built-in
- Temperature sensor
- Built-in
Wireless and power
- Bluetooth
- BLE 4.0–5.3
- Transmission power
- +6 dBm; programmable
- Wireless range
- Up to 30 m
- Receiver sensitivity
- −98 dBm
- Battery
- Replaceable ER14505
- Battery capacity
- 2700 mAh
- Current consumption
- 26 µA
- Estimated battery life
- 4 years; estimate based on average consumption, not a guaranteed runtime
Operating modes and integration
- Operating modes
- Storage, angle, bucket, blade, parallel rotation, perpendicular rotation, vibration
- Operating hours counter
- Counts while triggered in each operating mode; updates every 5 seconds; resets when the mode changes
- Rotation detection
- Clockwise and counterclockwise; parallel or perpendicular mounting relative to the rotation axis
- Protocols
- Closed (connection), Open (Escort DU-BLE advertising), Mini (extended advertising)
- Advertising interval
- 1–2 seconds; shorter intervals increase power consumption
- Configuration and diagnostics
- Sensor Configurator mobile app; iOS / Android
- Diagnostic codes
- −127: battery depleted; −128: accelerometer fault. Transmitted as temperature values; not physical temperatures.
Source: DOT BAS v6.1 User Manual [261002], pages 3–22.
The manual does not specify angular accuracy or measurement sampling rate. Mini integration requires Universal Integration on DOT trackers or an equivalent third-party feature; verify the tracker configuration and supported protocol.
DOT BAS v6.1
Support
For installation and product questions, contact our technical support team.
Create a support request →