Additional tag tables

0.0

Input IN0 - in Wialon in1

messages Wialon I / 0

09 0C F0 84 63                      31 Bit 0 0x6384f00c = 0110 0011 1000 0100 1111 0000 0000 1100 0 - IN0 = 0 1 - IN1 = 1 2 - IN2 = 1 3 - IN3 = 1 4 - IN4 = 0 5 - IN5 = 0 6 - IN6 = 0 7 - IN7 = 0 8 - OUT0 = 0 9 - OUT1 = 0 10 - OUT2 = 0 11 - OUT3 = 0 12,13 - GSM = 3 14,15 - GPS / Glonass = 3 16 - MOVE_SENS = 0 17 - SIM = 0 18 - 1 = SIM_INSERT 19 - ST0 = 0 20 - ST1 = 0 21 - ST2 = 0 22.23 - Bat status 1 = 24-31 - VOLT = 99 (99 * 150 = 14850 mV)

1.0

Input IN1 - in Wialon in2

messages Wialon I / 0

2.0

Input IN2 - in Wialon in3

messages Wialon I / 0

3.0

Input IN3 - in Wialon in4

messages Wialon I / 0

4.0

Input IN4 - in Wialon in5

messages Wialon I / 0

5.0

Input IN5 - in Wialon in6

messages Wialon I / 0

6.0

Input IN6 - in Wialon in7

messages Wialon I / 0

7.0

Input IN7 - in Wialon in8

messages Wialon I / 0

8.0

Output OUT0 - in Wialon out1

messages Wialon I / 0

9.0

Output OUT1 - in Wialon out2

messages Wialon I / 0

10.0

Output OUT2 - in Wialon out3

messages Wialon I / 0

11.0

Output OUT3 - in Wialon out4

messages Wialon I / 0

12.0

the state of the GSM modem (messages Wialon gsm_st)

0 - off, 1 - Registration in network 2 - comp. 3 server - replies from the server (standard)

13.0

14.0

the state of GPS / Glonass module (messages Wialon nav_st)

0 - off 1 - search for satellites, 2 - <8 satellites, 3 - more than 8 satellites (normal)

15.0

16.0

Motion Sensor (messages Wialon mw)

1 - motion is 0 - no movement

17.0

SIM card / SIM-chip (messages Wialon sim_t)

1 - sim-chip 0 - sim-card

18.0

the presence of a SIM card / SIM-chip (messages Wialon sim_in)

1 - insert, 0 - no

19.0

st0 - mode service / sensor opening

mode (0 - monitoring, 1 - protection)

20.0

st1 - SOS mode monitor / alarm mode protection / 1-wire discrete mode

status of the alarm button (SOS) / alarm in the armed mode

21.0

st2 - Status of plugs

ignition or ignition of the CAN virtual

22.0

Backup battery status (in messages Wialon pwr_in)

00 - less than 3V or not connected, 01 - from 3V to 3.8 V, 10 - from 3.8V to 4.1V, 11 - more than 4.1V (normal)

23.0

24.0

external voltage (messages Wialon pwr_ext)

External voltage divided by 150 example: 0x54 = 84 * 150 = 12600 mV max. 38400 mV

25.0

26.0

27.0

28.0

29.0

...

31.0

0.0

GPS / GLONASS status [nav_st]

1.0

2.0

GSM status [gsm_st]

3.0

4.0

5.0

Active SIM [sim_t]

0 - SIM1, 1 - SIM2

6.0

status SIM card 1 GSM [sim1_st]

7.0

8.0

9.0

status SIM card 2 GSM [sim2_st]

10.0

11.0

12.0

Server Status 0 [S0_st] - service or monitoring server 4

13.0

14.0

Status of Server 1 [S1_st] - monitoring server 1

15.0

16.0

Server 2 status [S2_st] - monitoring server 2

17.0

18.0

Server 3 status [S3_st] - monitoring server 3

19.0

20.0

Accelerometer [mw]

21.0

22.0

Tamper sensor [os] / BLE Tag (L, A seies)

23.0

MicroSD card [msd]

24.0

25.0

Bluetooth [BT]

26.0

gyroscope [gyro]

27.0

28-30

WIFI module status

0 - MODULE_NOT_FOUND 1 - MODULE_FOUND 2 - NETWORK_NOT_FOUND 3 - NETWORK_FINDING 4 - NETWORK_FOUND 5 - NETWORK_CONNECTING 6 - NETWORK_CONNECTED

31.0

0.0

...

5.0

registration request unit

request sent

6.0

registration request unit

request has been successfully worked out

7.0

registration request unit

Error in query

8.0

registration request unit

Error in query

9.0

registration request unit

10.0

query device settings

request sent

11.0

query device settings

request has been successfully worked out

12.0

query device settings

Error in query

13.0

query device settings

Error in query (the same settings)

14.0

query device settings

15.0

request the current version

request sent

16.0

request the current version

request has been successfully worked out

17.0

request the current version

Error in query

18.0

request the current version

Error in query

19.0

request the current version

20.0

request for a piece of firmware

request sent

21.0

request for a piece of firmware

request has been successfully worked out

22.0

request for a piece of firmware

Error in query (Bad SW version for HW)

23.0

request for a piece of firmware

Error in query

24.0

request for a piece of firmware

firmware is loaded successfully

25.0

transfer request settings

request sent

26.0

transfer request settings

request has been successfully worked out

27.0

transfer request settings

Error in query

28.0

transfer request settings

Error in query

29.0

transfer request settings

30.0

confirmation

request sent

31.0

confirmation

request has been successfully worked out

32.0

confirmation

Error in query

33.0

confirmation

Error in query

34.0

confirmation

35.0

querying the server

request sent

36.0

querying the server

request has been successfully worked out

37.0

querying the server

Error in query

38.0

querying the server

Error in query

39.0

querying the server

...

60.0

Team registration

internal command

61.0

Team registration

a team from the server

62.0

Team registration

command via SMS

63.0

Team registration

team through the Viewer

64.0

Team registration

team call

65.0

Team registration

reserve

66.0

Team registration

reserve

67.0

Team registration

reserve

68.0

Team registration

reserve

69.0

Team registration

reserve

70.0

command to update the device settings

internal command

71.0

command to update the device settings

a team from the server

72.0

command to update the device settings

command via SMS

73.0

command to update the device settings

team through the Viewer

74.0

command to update the device settings

team call

75.0

command to update the device settings

reserve

76.0

command to update the device settings

reserve

77.0

command to update the device settings

reserve

78.0

command to update the device settings

reserve

79.0

command to update the device settings

reserve

80.0

command to update the device software

internal command

81.0

command to update the device software

a team from the server

82.0

command to update the device software

command via SMS

83.0

command to update the device software

team through the Viewer

84.0

command to update the device software

team call

85.0

command to update the device software

reserve

86.0

command to update the device software

reserve

87.0

command to update the device software

reserve

88.0

command to update the device software

reserve

89.0

command to update the device software

reserve

90.0

command to update the device software

100.0

Device startup

before restart

199.0

GeoZones

200.0

MORE_LOADER_ERRORs

cancel update

201.0

MORE_WR / RD_ERRORs

cancel update

202.0

CRC_32 ERROR

cancel update

203.0

UpSetSt

update the configuration at each start

204.0

UpSetTime

re-set the interval

250.0

Error external navigation module

restart module

251.0

No NMEA

restart device

300.0

Time synchronization of GPS / Glonass

301.0

synchronization of time through the configurator

302.0

time synchronization with server monitoring

303.0

load filter: Duplicate Time

304.0

send a first valid position

305.0

send last valid point

306.0

By time interval in parking state

event 1

307.0

worked condition of the distance

308.0

The first point is valid after the start of the device

309.0

NMEA packet loss from the module

310.0

Error NMEA

restart device

311.0

The first coordinate is valid

312.0

the latter is valid coordinate

313.0

worked condition speed

314.0

worked condition of the distance

315.0

worked condition at a corner

event 4

316.0

worked condition at zero speed

317.0

Discrete input triggering

318.0

Manifestation of parameter vs_12 (only for L and A-Series)

319.0

Reset filters coordinate when sending to the server

320.0

First message info

321.0

GPS / GLONASS power short circuit detect

322.0

On command 0101

323.0

On command 010B

324.0

325.0

Alternative positioning

326.0

BLE sensor event

327.0

The positioning source has changed

400.0

Switching to parking mode

event 2

401.0

Switching to sleep mode

402.0

came out of sleep by the movement

403.0

came out of sleep by the Timer

404.0

came out of sleep when the external power was turned on. Voltage

405.0

came out of sleep by the triggered input

406.0

came out of sleep by the GPS / Glonass

407.0

Start movenent

event 3

408.0

409.0

Shock detected

410.0

Tilt detected

500.0

No response from the server

501.0

No response from the server when you try again

502.0

Error while sending data from the memory

503.0

Error sending current data

504.0

ER_HEADER

505.0

ER_SERVER_ANS (0xFE)

510.0

error in ADC

restart devices

511.0

error in the GSM

restart devices

512.0

error transmission data to the server

restart devices

513.0

inc_nmea

514.0

write tempory settings

515.0

Checksum error when sending packets

516.0

switching between SIM cards

517.0

RTC fail

520.0

external power changed

530.0

Cover Sensor Activated

531.0

Successful command delivery to the device

600.0

switched mode DEEP SLEEP

Deep Sleep mode (consumption 4-5 mA)

601.0

I emerged from DEEP SLEEP timer

signal transmission life

602.0

I emerged from DEEP SLEEP to change the inlet

transfer of disturbing messages

603.0

It emerged from DEEP SLEEP motion detected

604.0

It emerged from DEEP SLEEP to change the input voltage

610.0

MODBUS_RTU PACKET

618.0

620.0

621.0

666.0

On command

restart devices

667.0

system error

restart devices

700.0

a request to upload a file from the tachograph .ddd

701.0

.ddd start automatically upload the file over the interval

702.0

.ddd file successfully vygruzhen around tachograph

703.0

705.0

Invalid password authorization canister in the tachograph

706.0

An error occurred when unloading from the tachograph

707.0

card is removed during a file upload .ddd

708.0

No card in the card reader or card is not authorized

709.0

tachograph stopped responding (perhaps asleep)

710.0

Driver Activity has changed

800.0

G-sensor command response calibration

850.0

External device firmware has been downloaded

851.0

External device firmware has been updated

852.0

An error occurred while external device updating

853.0

An error occurred while downloading the external device firmware

860.0

CAN sniffer started

861.0

CAN autobaudrate ready

862.0

log collect finished, file is full

863.0

log collect finished, timeout

865.0

CAN sniffer start fail

866.0

CAN autobaudrate fail

867.0

create CAN file fail

868.0

save CAN file fail

860-1116

Exceptions of the G-Sensor

888.0

locator error

restart devices

1200.0

Change state of IN0

...

...

1207.0

Change state of IN7

1208.0

Change state of IN8 - 1-WIRE discrete mode (IN8 for A5)

1209.0

Change state of IN9 - Sensor opening (IN9 for A5)

1210.0

Ignition is ON

1211.0

Ignition is OFF

1212.0

Engine is ON

1213.0

Engine is OFF

1250 + x

Change state of extended INx, x = 0...9

1300 - 1315

start of exceed of acceleration threshold

1320 - 1335

end of exceed of acceleration threshold

1340 - 1345

start of exceed of speed threshold

1350 - 1355

end of exceed of speed threshold

0.0

Inner memory

No settings

Settings OK

1.0

External Memory

issue

OK

2.0

Real Time Clock

issue

OK

3.0

powered modem

off

included

4.0

modem status

no

OK

5.0

GSM AT command

not responding

OK

6.0

SIM card

not inserted

OK

7.0

SIM PIN

activated

not activated

8.0

PIN check

issue

OK

9.0

power module GPS / Glonass

off

included

10.0

Module GPS / Glonass

NO_NMEA

NMEA OK

11.0

Motion Sensor

not fixed

OK

12.0

speed NMEA

9600 - 0 (mstar) 115 200 - 1 (navia)

13.0

Number current SIM Card

0- primary, 1 - secondary

14.0

15.0

16.0

SIM card 2

not inserted

OK

17.0

SIM PIN 2

activated

not activated

18.0

PIN Check 2

issue

OK

19.0

reserve

20.0

reserve

21.0

reserve

22.0

reserve

23.0

reserve

24.0

reserve

25.0

reserve

26.0

reserve

27.0

reserve

28.0

reserve

29.0

reserve

30.0

reserve

31.0

reserve

0.0

HPC168 (SV-10) sensor1 - how many entered

comes when the door closes

1.0

HPC168 (SV-10) sensor1 - how many people came out

comes when the door closes

2.0

HPC168 (SV-10) sensor2 - how many entered

comes when the door closes

3.0

HPC168 (SV-10) sensor2 - how many people came out

comes when the door closes

4.0

HPC168 (SV-10) sensor3 - how many entered

comes when the door closes

Built-in sensor temperature (for beacons and A, L series)

temperature with sign - 1 byte

5.0

HPC168 (SV-10) sensor3 - how many people came out

comes when the door closes

The reason for the formation of the package and the operating status of the modules (for beacons)

reason for generating a package to the server: bit 0 - event interval bit 1 - by event start of movement on dd bit 2 - by event end of movement by dd bit 3 - on button press bit 4 - USB event / depassivation (for SmartSun3) bit 5 - by event course bit 6 - event speed bit 7 - by event time bit 8 - event distance bit 9 - upon reset event/battery replacement bit 10 - online mode status (on/off) bit 11 - by lift sensor (for SmartSun version) bit 12 - by changing the charging status bit 13 - emergency mode status (for SmartSun version) bit 14 - by temperature event bit 15 - charging status for TAG Qi (0 - no charging, 1 - charging) module operation statuses (0-OK, 1-ERROR/absent): bit 16 - GSM modem bit 17 - GPS module bit 18 - BT module bit 19 - motion sensor bit 20 - SIM card 1 bit 21 - SIM card 2 bit 22 - current SIM card (0-SIM1, 1-SIM2) bit 23 - external temperature sensor / RTC sensor

6.0

HPC168 (SV-10) sensor4 - how many entered

comes when the door closes

7.0

HPC168 (SV-10) sensor4 - how many people came out

comes when the door closes

number of packet (only for L1 and A-Series)

8.0

HPC168 (SV-10) - door and camera status

bit0 - door sensor1 bit1 - door sensor2 bit2 - door sensor3 bit3 - door sensor4 ... bit8 - camera1 is obscured bit9 - camera2 is obscured bit10 - camera3 is obscured bit11 - camera4 is obscured ... bit16 - no connection with camera1 bit17 - no connection with camera2 bit18 - no connection with camera3 bit19 - no connection with camera4

L and A series - move sensor status

9.0

10.0

EcoDrive (only for Integral and Arnavi)

acceleration thresholds bit 23 - Navigation Antenna Orientation Error bit 22 - Exceeding the permissible deviation of the tracker axes bits[16:21] - Exceeding the speed limit bits[12:15] - Exceeding the threshold of vertical accelerations bits[8:11] - Exceeding the threshold of lateral accelerations bits[4:7] - Exceeding the threshold during deceleration bits[0:3] - Exceeding the threshold during acceleration

11.0

EcoDrive (only for Integral and Arnavi)

threshold exceed duration, ms

12.0

EcoDrive (only for L, A series)

acceleration thresholds and events bit 6 - Navigation Antenna Orientation Error bit 5 - Exceeding the permissible deviation of the tracker axes bit 4 - Exceeding the threshold of permissible speed bit 3 - Exceeding the threshold of vertical accelerations bit 2 - Exceeding the threshold of lateral accelerations bit 1 - Exceeding the threshold during deceleration bit 0 - Exceeding the threshold during acceleration

13.0

Visibility status of BLE sensors (only for L, A series)

bit 7 - mac 4 bit 6 - mac 3 bit 5 - mac 2 bit 4 - mac 1 1 - online, 0 - offline

14.0

wireless relays state bits

1 - activated, 0 - deactivated

15.0

19.0

Positioning information

byte 0 - coordinate source: 0 - no coordinate 1 - satts 2 - locator 3 - geotag

byte 1 - current coordinate source selection mode byte 2 - coordinate source selection mode by setting bit0 - satts navigation bit1 - locator (WIFI) bit2 - locator (LBS) bit3 - geotag

29.0

Stoneridge tachograph. Driver and co-driver states (CAN external)

bits [0:2] - Driver 1 - working state bits [3:5] - Driver 2 - working state 0000 - rest, 0001 - available, 0010 - work, 0011 - driving, 0101 - error, 0110 - Not available bits [6:7] - Motion detection 00 - parking, 01 - movement, 10 - error, 11 - Not available bits [8:11] - Driver 1 - time-related states bits [16:19] - Driver 2 - time-related states 0000 - Limits not reached 0001 - 15 minutes to 4½h 0010 - reached 4½h 0011 - 15 minutes before 9h 0100 - reached 9h 0101 - 15 minutes before 16h 0110 - reached 16h 0111 - other 1000 - error 1001 - Not available bits [12:13] - Driver 1 - driver card bits [20:21] - Driver 2 - driver card bits [14:15] - Speeding 00 - no, 01 - yes, 10 - error, 11 - Not available

30.0

Stoneridge tachograph. Driver and partner states (CAN built-in)

Seconds counter for device operation from start/restart (only for L3, A4W and C4)

33.0

iQFreeze

Register to read: 0x0500 (statuses)

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 NOCONNECT ADC1ERR ADC2ERR ADC3ERR ADC4ERR ADC5ERR ADC6ERR TIMEERR HSERR DR DR2 DR3 IN1 IN2 0 0

34.0

iQFreeze

ADC1 Data from analog temperature sensor 1

temperature is transmitted to the server multiplied by 100 (to convert the decimal value into an integer), for example 28.33 to 2833. For the 0 (zero) degree takes a value of 50,000, but when unpacking the values ​​from the device you need to take 50,000, for example: 1. convert -26.33 -2633, add 50000 = 47367 pass on the server subtract 50000, and again obtain -2633 2. 16.55 transform 1655, we add the 50,000 = 51655 pass on the server subtract 50000, and again obtain 1655

35.0

iQFreeze

ADC2 Data from analog temperature sensor 2

36.0

iQFreeze

ADC3 Data from analog temperature sensor 3

37.0

iQFreeze

ADC4 Data from analog temperature sensor 4

38.0

iQFreeze

ADC5 Data from analogue temperature sensor 5

39.0

iQFreeze

ADC6 Data from analog temperature sensor 6

40.0

IrmaMatrix sensors errors [irma_x_err]

3 Bytes value. 3 bits per sensor. 8 sensor max. Sensor numeration starts from 1 0 - no error 1 - sensor not found 2 - sabotage

Examle [U+0421]8 28 20 10 00 means sabotage on sensor 1 and sensor 3 not found

41.0

IrmaMatrix sensors counts[irma_x_in] and [irma_x_out]

3 Bytes value. LSByte in value - sensor ID - "x" next byte - "irma_x_in" value MSByte of value - "irma_x_out value"

Example [U+0421]8 29 03 01 04 means irma_3_in = 1 irma_3_out = 4

42.0

KDM_DM1 density [kdm1.dens]

3 Bytes value. density

43.0

KDM_DM1 width [kdm1.width]

3 Bytes value. width

44.0

KDM_DM1 bit fields [kdm1.bits]

3 Bytes value. LSByte in value - middle_mode.bits next byte - front_mode_bits MSByte of value - bunker_options.bits

48.0

Alternate Position Mark Counter

49.0

Service flags

Black box status: 0 - space available, 1 - overflow bit 0 - Monitoring server 1 ... bit 3 - Monitoring server 4

50.0

Scheduled activation counter

51.0

Motor minutes

52.0

Immo bypass system status

52[0] - Vehicle status 0 bits 0.1 Central lock status (00 - no information; 01 - closed; 10 - open; 11 - closed and armed) bit 2 left front door open (1 - open, 0 - closed) bit 3 right front door open (1 - open, 0 - closed) bit 4 left rear door open (1 - open, 0 - closed) bit 5 right rear door open (1 - open, 0 - closed) bit 6 trunk open (1 - open, 0 - closed) bit 7 hood open (1 - open, 0 - closed) 52[1] - Vehicle status 1 bit 0 dimensions are enabled (1 - enabled, 0 - disabled). The status is transmitted with the support of the autorun module firmware bit 1 ignition on (key or autostart system) bit 2 engine running (1 - running, 0 - stopped) bit 3 transmission type (1 - automatic transmission/robot, 0 - manual transmission) bit 4 the transmission is not ready for autostart (1 - yes, 0 - no). Depending on the type of transmission: • Automatic transmission - the transmission is not parked; • robot—the transmission is not parked; • Manual transmission - logical neutral is not passed bit 5 the handbrake is not ready for autostart (1 - lowered - not ready, 0 - raised - ready). Depending on the type of transmission: • Automatic transmission—handbrake not raised; • robot—the handbrake is not raised; • Manual transmission - the handbrake is not raised when passing logical neutral bit 6 DRLs are enabled (1 - yes, 0 - no). The status is transmitted with the support of the autorun module firmware bit 7 Low beam is on (1 - yes, 0 - no). The status is transmitted with the support of the autorun module firmware 52[2] - Vehicle status 2 bit 0 engine immobilization active (1 - active, 0 - inactive) bit 1 Valet mode is enabled (1 - enabled, 0 - disabled) bit 2 seat belts are not fastened (1 - yes, 0 - no). Status transmitted with the support of the autorun module firmware bit 3 windows down (1 - yes, 0 - no). Status is transferred with support autorun module firmware bit 4 the interior light is on (1 - yes, 0 - no). The status is transferred when firmware support for autorun module bit 5 there is not enough washer fluid (1 - yes, 0 - no). The status is transferred when firmware support for autorun module bit 6 control output 1 (1 - enabled, 0 - disabled) bit 7 control output 2 (1 - enabled, 0 - disabled)

53.0

53[0] - Vehicle condition 3 - Reason for canceling autostart. Flag appears after the module receives a request command autostart if it cannot be performed bit 0 - transmission error (1 - yes, 0 - no) bit 1 - door opening (1 - yes, 0 - no) bit 2 - the engine is already running (1 - yes, 0 - no) bit 3 - hood open (1 - yes, 0 - no) bit 4 - immobilizer bypass is not trained (1 - yes, 0 - no) bit 5 - there was a soft landing (1 - yes, 0 - no) bit 6 - alarm triggered (1 - yes, 0 - no)

54.0

Immo bypass system status

54[0] - Status of the immo bypass system in normal message operation mode Data is buffered to avoid losses during active state changes 0x00 autostart disabled (impossible) 0x01 autostart enabled, engine not running 0x02 autostart process in progress 0x03 engine started as a result of autostart 0x04 the engine did not start after all attempts 0x05 autostart process stops engine stopped 0x06 autostart error, the engine was started but stopped 0x07 passing through the logical neutral 0xFF bootloader mode 54[1] - Cause of alarm message Installed when occurrence of an alarming event. Resets after end of the vehicle alarm. bit 0 accelerometer (1 - triggered, 0 - no triggered) bit 1 ignition on (1 - on, 2 - off) bit 2 left front door open (1 - open, 0 - closed) bit 3 right front door open (1 - open, 0 - closed) bit 4 left rear door open (1 - open, 0 - closed) bit 5 right rear door open (1 - open, 0 - closed) bit 6 trunk open (1 - open, 0 - closed) bit 7 hood open (1 - open, 0 - closed)

55.0

Immo bypass system status

55[0] - 55[1] - Low-Endian format. Remaining engine operating time according to the autostart timer. Data is sent when the autorun procedure is started, repeated sending is carried out with a sampling rate of 8 seconds. If the engine starts without a timer, the value is 0xFFFF.

56.0

Immo bypass system status

Econometric value (can bus)

60.0

DI (tacho card number) for driver 1 first part

For example driver ID (DI) is string "RU [IDENTIFIER]". To pack this string, we divide it into two parts - alphabetic and numeric. The alphabetic takes 3 bytes (the last byte is a space, so it is discarded), and the numeric 16 characters (digits). The numerical part is too large, so we divide it into two parts. The first 9 digits ( from left side) are packed in 4 bytes, the remaining 7 (right side) digits are packed in 3 bytes of type integer. Totaly we got 2 + 4 + 3 = 9 bytes in sequence. Let's divide them between three virtual subtags for each driver. Attention when forming the initial string, you need to add the space to the alphabetic part and take filling with zeros to the required number of digits for each of the numerical parts. !!!If there is no card in card reader of tachograph device will send only first part with zero value!!!

B4 3C 52 55 87

61.0

DI (tacho card number) for driver 1 second part \ bit mask for SKT

B4 3D D6 12 00

62.0

DI (tacho card number) for driver 1 third part. \ charge in % for SKT

B4 3E 72 D2 87

63.0

DI (tacho card number) for driver 2 first part

64.0

DI (tacho card number) for driver 2 second part

65.0

DI (tacho card number) for driver 2 third part

66.0

Tachograph TCO1 FMS

In example received value is 0x332211 LSByte 0x11 is Data Byte1, 0x22 - Data Byte2 and 0x33 (MSByte) - Data Byte 3 Data Byte 1: bits[6:7] - Vehicle motion (00 = Vehicle motion not detected, 01 = vehicle motion detected) bits[3:5] - Driv. 2 working state (000 = Rest, 001 = Driver available, 010 = Work, 011 = Drive, 110 = Error, 111 = not available bits[0:2] - Driv. 1 working state (000 = Rest, 001 = Driver available, 010 = Work, 011 = Drive, 110 = Error, 111 = not available Data Byte 2: bits[6:7] - Vehicle Overspeed (00 = No overspeed, 01 = Overspeed) bits[4:5] - Driver 1 card (00 = Card not present, 01= Card present) bits[0:3] - Driv. 1 time rel states (0000 = normal, 0001 = 15 min bef. 4 ½ h, 0010 = 4 ½ h reached, 0011 = 15 min bef. 9 h, 0100 = 9 h reached, 0101 = 15 min bef. 16 h, 0110 = 16h reached, 1110 = Error, 1111 = not available) Data Byte 3: bits[6:7] - don`t care bits[4:5] - Driver 2 card (00 = Card not present, 01= Card present) bits[0:3] - Driv. 2 time rel states (0000 = normal, 0001 = 15 min bef. 4 ½ h, 0010 = 4 ½ h reached, 0011 = 15 min bef. 9 h, 0100 = 9 h reached, 0101 = 15 min bef. 16 h, 0110 = 16h reached, 1110 = Error, 1111 = not available)

B4 42 11 22 33

67.0

Tachograph DRIVER1_DRIVE_TIME

minutes

68.0

Tachograph DRIVER2_DRIVE_TIME

minutes

69.0

Tachograph DRIVER1_TOTAL_DRIVE_TIME

minutes

70.0

Tachograph DRIVER2_TOTAL_DRIVE_TIME

minutes

71.0

Tachograph DRIVER1_REST_TIME

minutes

72.0

Tachograph DRIVER2_REST_TIME

minutes

73.0

Tachograph DRIVER1_ACT_TIME

minutes

74.0

Tachograph DRIVER2_ACT_TIME

minutes

75-79

Reserved for Tachograph

80.0

TPMASTER and vesaTPMS

tpms[N].p - pressure in kPa (Pressure calculation =P*5.5-101.3 KPA) tpms[N].w-const50 - temperature in °C Optionally, warnings may be sent instead of temperature: tpms[N].w.level - 3 bits by level tpms[N].w.t - by temperature tpms[N].w.f - quickly deflates the tire tpms[N].w.e - general sensor error N - wheel number in the system

BE 50 11 22 33 50 - virtual subtag number 11 - sensor temperature or warnings (W) 22 - sensor pressure (P) 33 - wheel number (N)

85.0

SPN183_FUEL_RATE

*10 Litres

86.0

SPN100_ENGINE_OIL_PRESSURE

kPa

90.0

SDRM

91.0

Accelerometer X-Axis (for A, L, A4, A4MAX, C4 series)

92.0

Accelerometer Y-Axis (for A, L, A4, A4MAX, C4 series)

93.0

Accelerometer Z-Axis (for A, L, A4, A4MAX, C4 series)

94.0

MDSM7/MDAS9 connect status

Bits 0 –MDSM7 online Bits 1 –MDAS9 online

95.0

MDSM7 data

Bits 0 – 7 – DSM Event: 0bit – Drowsiness (0: none, 1: active) 1bit – Distraction (0: none, 1: active) 2bit – Yawning (0: none, 1: active) 3bit – Phone (0: none, 1: active) 4bit – Smoking (0: none, 1: active) 5bit – Driver Absence (0: none, 1: active) 6bit – Mask (0: none, 1: active) 7bit: dummy Bits 8 – 15 – Error Code: 0bit – Camera Fail (0: none, 1: active) 1bit – GPS Fail (0: none, 1: active) 2bit – CAN Fail (0: none, 1: active) 3bit – Dummy 4bit – Camera Blocked (0: none, 1: active) 5~7bit: Dummy Bits 16 – 19 – G-Sensor Event: 0x00: None 0x01: Event Bits 20 – 23 – Record Status: 0x00 – None 0x01 – Recording (Mic off) 0x02 – Recording (Mic On)

97.0

MDAS9 events

Bits 0 – 1 – LDW Left: 0x00 – None 0x01 – Recognized 0x02 – Left LDW event 0x03 – Function disabled Bits 2 – 3 – LDW Right: 0x00 – None 0x01 – Recognized 0x02 – Right LDW event 0x03 – Function disabled Bits 4 – 5 – SDA: 0x00 – None 0x01 – Recognized (ahead vehicle) 0x02 – SDA event 0x03 – Function disabled Bits 6 – 7 – Front Vehicle Start Alarm (FVSA): 0x00 – None 0x02 – FVSA event 0x03 – Function disabled Bits 7 – 8 – Forward Proximity Warning (FPW): 0x00 – None 0x02 – FPW event 0x03 – Function disabled Bits 9 – 10 – Forward Collision Warning (FCW): 0x00 – None 0x02 – FCW event 0x03 – Function disabled Bits 11 – 12 – PCW: 0x00 – None 0x01 – Recognized 0x02 – PCW event 0x03 – Function disabled

98.0

MDAS9 status

Bits 0 – 7 – Error Code: 0x00 – None 0x01 – Low visibility 0x02 – Camera blocked Bits 8 – 15 – Record: 0x00 – None 0x01 – Recording (Mic off) 0x02 – Recording (Mic On)

99.0

MDAS9 SLR

Bits 0 – 7 – State: 0x00 – None 0x02 – Over speed Event 0x03 – Function Disable Bits 8 – 15 – Recognize, Km/h: 0x00 – None 0x1E – 30 0x28 – 40 0x32 – 50 0x3C – 60 0x46 – 70 0x50 – 80 0x5A – 90 0x64 – 100 0x6E – 110 0x78 – 120 Bits 16 – 23 – Sensitivity, %: 0x00 – 0 0x05 – 5 0x0A – 10 0x0F – 15 0x14 – 20 0xFF – Unknown

100.0

Beacon

Beacon[N][MINOR]

64 01 02 03

101-111

Velo_M1

112-116

BWS

188.0

External Voltage for 100 V devices

199.0

GeoZones

200-239

Universal BLE Integration Options (A4, A4MAX)

240.0

Event code for the "User Logic" functionality

241.0

The "user_par" value for the "User Logic" functionality

255.0

packet id

0.0

IN 0 - negative input or OUT 0 - negative output (blocking)

messages Wialon I / 0

0C F0 84 09 63                      31 Bit 0 0x6384f00c = 0110 0011 1000 0100 1111 0000 0000 1100 0 - IN0 = 0 1 - IN1 = 1 2 - IN2 = 1 3 - IN3 = 1 4 - IN4 = 0 5 - IN5 = 0 6 - IN6 = 0 7 - IN7 = 0 8 - OUT0 = 0 9 - OUT1 = 0 10 - OUT2 = 0 11 - OUT3 = 0 12,13 - GSM = 3 14,15 - GPS / Glonass = 3 16 - MOVE_SENS = 0 17 - SIM = 0 18 - 1 = SIM_INSERT 19 - ST0 = 0 20 - ST1 = 0 21 - ST2 = 0 22.23 - Bat status 1 = 24-31 - VOLT = 99 (99 * 150 = 14850 mV)

1.0

IN 1 - positive input (ignition)

messages Wialon I / 0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

9.0

10.0

11.0

12.0

the state of the GSM modem (gsm_st)

0 - off, 1 - Registration in network 2 - comp. 3 server - replies from the server (standard)

13.0

14.0

the state of GPS / Glonass module (nav_st)

0 - off 1 - search for satellites, 2 - <8 satellites, 3 - more than 8 satellites (normal)

15.0

16.0

Motion Sensor (mw)

1 - motion is 0 - no movement

17.0

SIM card / SIM-chip (sim_t)

1 - sim-chip 0 - sim-card

18.0

the presence of a SIM card / SIM-chip (sim_in)

1 - insert, 0 - no

19.0

Backup battery (Internal) voltage (5 bits)

Internal voltage divided by 150 example: 0x1B = 27 * 150 = 4050 mV max. 4800 mV

20.0

21.0

22.0

23.0

24.0

External voltage (messages Wialon pwr_ext)

External voltage divided by 150 example: 0x54 = 84 * 150 = 12600 mV max. 38400 mV

25.0

26.0

27.0

28.0

29.0

30.0

31.0

120-129 MODBUS mbus 4 bytes

.....

210-229 VAL_x 4 bytes parametrs for additional services (210-219 used for special CAN data) DC 0C F0 84 63

4 bytes parametrs for additional services (220-229 used for universal BLE integration)

230-239

.....

Next contact time in unixtime format (for beacon)